説明
Photoelectric high-precision absolute value encoder GDS60-PB
Parallel output user manual
★Before using the encoder, please read the following instructions and use it correctly!
| Mechanical spec. | Electrical spec. | ||
| Max. speed | 6000 RPM | Power supply | 10-30Vdc (5Vdc optional） |
| Shaft load | Axial 40N, radial 100N | Current consumption | < 300mA (24Vdc)no-load |
| impact | 1000m/s²(6ms),about 100g | output | 18-bit synchronous parallel signal (pure binary, or Gray code) |
| Anti-vibration | 200m/s²(10-2000Hz) about 20g | resolution | 1/262144FS |
| Allow axial jump | ±1.5mm | IP | IP65或IP68 |
| Allow radial jump | ±0.2mm | accuracy | 0.01º |
| structure | 60mm outer diameter, solid shaft, or hollow shaft | Operating temp. | -40℃~100℃ |
| Connection Type | 30-core shielded cable or aviation connector | Storage temp. | -40℃~85℃ |
Reliable and patented
|
Performance optimization
|
Wiring
| color | output | color | output | color | output |
| Black/1 | Bit 1 | Orange/3 | Bit 9 | Red/3 | Bit 17 |
| Black/2 | Bit 2 | Purple/1 | Bit 10 | Blue/2 | Bit 18 |
| Black/3 | Bit 3 | Purple/2 | Bit 11 | ||
| Green/1 | Bit 4 | Purple/3 | Bit 12 | Red/1 | KVCC note1 |
| Green/2 | Bit 5 | Yellow/1 | Bit 13 | Gray/1 | Reset note2 |
| Green/3 | Bit 6 | Yellow/2 | Bit 14 | Brown/1 | 10-30Vdc |
| Orange/1 | Bit 7 | Yellow/3 | Bit 15 | White/1 | GND 0V |
| Orange/2 | Bit 8 | Red/2 | Bit 16 | Blue/1 | Direction note3 |
Installation dimensions (Unit: mm)
- Clamping & synchro flange(default)
b．Synchro flange
- Hollow shaft
Signal output
GDS60-PB parallel push-pull output of the output signal(PNP as default), and the PLC input module (I / O) connections as shown below:
Extensions [Blue/Brown]: When connected to a high level of data increases counterclockwise; when clockwise, please connect the wire to the power ground (GND 0V)
Note:
* The encoder is a precision instrument, do not knock or bump encoders, gently, carefully use;
* Guaranteed encoder supply in the range 10-30Vdc and do isolation to prevent large-scale electric power grid to start the encoder produces shock;
* In the environment of strong electromagnetic interference, the signal line is best to use a dedicated line, such as double-shielded twisted pair cable can be ordered from the Company;
* Encoder signal line should be well grounded: close, both ends of the cable shielding should be grounded within two meters; greater distance encoder grounded metal enclosure, the encoder comes with cable shielding vacant, signal extension cable shielding in signal receiving end single-grounded; If the signal cable longer or outdoor use, signal cables should put metal iron pipe and metal pipe at both ends of the ground to use;
* Encoder protection class IP65, waterproof to use, but do not flooding the encoder shaft.
Japanese 
English 
French 
Spanish 
Korean 
Russian 
Vietnamese 
German
レビュー
レビューはまだありません。