Descripción
DYX-301 Single Shear Beam Load Cell
Characteristics & Usage:
The sensor elastic body with shear or curved cantilever beam structure, one end fixed, a section of force, low profile, high structural strength, can be used for a variety of tensile force and pressure load and measurement. It is dust seal, wide range, high precision, stable and reliable performance, easy installation and so on. Applicable to electronic weighing, weighing and other power measurement, weighing the industrial automation measurement and control system.
Dimensions:
Capacity &measurement:
| Capacity | METRO | UNA | si | C | re | W | H | 2- Φ | I |
| 50kg-3t | M12×1.75 | 130 | 12 | 26 | 76 | 32 | 32 | Φ13 | 55 |
| 3t-5t | M18×1.5 | 171.5 | 17.5 | 38.1 | 95.3 | 38.1 | 38.1 | Φ19.5 | 76 |
| 6t-10t | M30×2 | 225.6 | 25.4 | 50.8 | 122.9 | 50.8 | 50.8 | Φ26.4 | 105 |
Technical Parameters:
| Parameter | Unit | Technical Specifications | Parameter | Unit | Technical Specifications |
| Sensitivity | mV/V | 2.0±0.05 | Temperature coefficient of sensitivity | ≤%F·S/10℃ | ±0.03 |
| Nonlinear | ≤%F·S | ±0.03 | Operating temperature range | ℃ | -20℃～+80℃ |
| Hysteresis | ≤%F·S | ±0.03 | Input resistance | Ω | 350±20Ω |
| Repeatability | ≤%F·S | ±0.03 | Output Resistance | 3 | 350±5Ω |
| Creep | ≤%F·S/3min | ±0.05 | Safe Overload | ≤%F·S | 150% F·S |
| Zero output | ≤%F·S | ±1 | Insulation resistance | MΩ | ≥5000MΩ(500VDC) |
| Zero temperature coefficient | ≤%F·S/10℃ | ±0.03 | Excitation voltage | V | 5V-15V |
Wiring:
Input：Red（+）Black（-）Output：Green（+）White（-）Tension : White (+) Green (-)
Spanish 
English 
French 
Japanese 
Korean 
Russian 
Vietnamese 
German
Valoraciones
No hay valoraciones aún.