Descripción
DY360
Characteristics & Usage:
DY360 weighing control instrument adopts the most advanced high precision > A / D conversion chip and single chip microcomputer with high anti-interference performance as the core, fully considering the complexity of the industrial site and careful software and hardware design, so that the production and management can be guaranteed. This product is also suitable for iron and steel, metallurgy, chemical industry, grain, feed and other industries that need to be controlled by ingredients.
Dimensions:
Technical Parameters:
Service condition(s) | Environment temp.-20~70℃;relative humidity <= 90% |
voltage | AC 185~245V;frequency 50Hz/60Hz or DC 30V |
measurement error | +/- 0.5%F.S. |
Bridge support voltage | 9V; maximum current 500mA |
output node | Three-way relay;load 10A/250Vor 10A/30V;input 3 |
Input interface | basic configuration RS232 gorge line; optional configuration RS485 gorge line; 20 mA current loop serial port; 0-5V/1-5V/0-10V voltage, 0-20mA/4-20mA analog |
Measuring range | Positive and negative signals can be collected and positive and negative values can be displayed |
The controller has the following functions and characteristics:
1.Set integrates weighing, display, communication and control as a whole
2.The internally integrated switching power supply can be used normally in the range of 185V to 245V
3.It has analog and digital dual filtering functions.
4.Automatic error diagnosis, easy to find and solve problems
5.With automatic zero tracking function
6.Can realize automatic zero return to zero
7.With password permission setting function, easy to manage
8.Can set zero range, filtering intensity, baud rate, etc.
NOTE:
Before using the batching controller, please read the manual carefully to ensure that it is used correctly and give full play to its superior performance, and to make the equipment achieve better use effect. At the same time, please keep the instructions properly for future commissioning, maintenance and maintenance. If there are difficult problems in the use process, please feel free to contact our technical support department!
Introduction to the operation function of the controller:
- Demarcate
- Current loop inner code value adjustment
- Input and output test
- Protocol CB 920
- Continuous output mode
- Command output mode
- Protocol MODBUS
Division value
Valoraciones
No hay valoraciones aún.